4 - channel I2C SPI TTL Serial -safe Bi-directional Logic Level Converter - BSS138

Because the forarduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find
that they need to perform level shifting/conversion to protect the 3.3V device from 5V.other handy level shifters . from the DIP 74LVC245 to the fancy
bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level
shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following forNXP's app note.

 This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the
interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.

While we designed it for use with I2C, this works great for SPI, TTL Serial, and any other digital interface both uni-directional and bidirectional.
Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug
into a breadboard or perfboard.

Packing & Delivery